Nissan Repair Questions? Ask a Mechanic for Answers ASAP
Hello my name is ***** ***** thank you for your question.
Did you replace the throttle chamber? Also the crank sensor you installed, did you have a code for that also? Where did you buy that part?
Did you clear all the codes first?
First off, I am not a fan of after market electrical parts. They never tend to work right. But if you removed the new throttle chamber, yes, we need to re-install it and clear all the codes. Then start the car and let it idle and run to warm up
Can you do that?
If it still doesn't run, do you have your old Crank Sensor?
Did you have a code for that and that is why you replaced that also?
Lets put the old crank sensor in and put the new throttle chamber on, and then see if it starts and idles
How handy are you. Are you able to access that fuel pump fuse?
hold on 1 min. please.
So the engine won't keep turning over on it's own?
I should be online around 9 or 10 AM Wed EST
Then online the whole day into the evening.
are the spark plugs loaded with fuel?
ok.. I offered you additional service also so if you feel speaking with me would be easier to help you with this.
Ok.. Does the car start and idle?
Did you try clearing out all the codes and did you put that original crank sensor back in?
Engine will not turn over with spark plugs removed?
So I understand. With no spark plugs in the engine, the engine will not continually turn over? I am starting to think the engine jumped time and maybe hitting a valve which is stopping it from turning over.
Let me know.
ok.. Yes, make sure the spark plugs stay out and manually try to turn the engine. If at any point you feel resistance, stop!!!
Is there a tight spot? Meaning when you turn it manually there is a couple spots that feel tight?
The other is inside.
So the engine turns over ok now, it just doesn't start. Is that correct?
Did you put that original Crank Sensor back in?
Yes, I have been asking you to that a few times. I don't trust after market sensors.
Ok.. Will it start and idle? Does it have the new throttle chamber installed? Has all codes been cleared? Did any return?
See if it will start and idle with the throttle body unplugged.
Really.. It should. I am wondering if you may have a computer problem.
I am on my phone righy now.
So the vehicle is back to not starting again? Any new codes that won't clear?
Your welcome. Glad you got it running !