How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose)
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 613
Experience:  16 years of experience
2499435
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

I have a 2011 Nissan Altima Hybrid. I have a bad bearing hub

Customer Question

I have a 2011 Nissan Altima Hybrid. I have a bad bearing hub on the right front and want to replace it myself. Last time I messed with the brakes, the braking sensors went snapfooey and I had to take it to the mechanic to get the brakes working again. My question is: Is there a way to disable the brake system sensors so I can preform the hub replacement, then turn it them back on with no ill effects? In searching the internet, I saw where you can put the Prius in "Pad Replacement Mode" by Cycling the ignition three times so I tried that on the altima but it did not work. Thanks for your help.
Submitted: 1 year ago.
Category: Nissan
Expert:  JOHN aka Eauto replied 1 year ago.

front or rear?