How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Mechanic, Mobile Elect., ARA Cert.
Category: Nissan
Satisfied Customers: 20708
Experience:  Have been Repairing most makes of Nissan for over 30 years, even when they were Datsun
1609972
Type Your Nissan Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I have to install a mobile radio Motorola CDM 1250 in a

Customer Question

i have to install a mobile radio Motorola CDM 1250 in a Pathfinder 2013.
The owner of this Radio is Hydro quebec and i am the telecom technician for installing it.
This radio need
1) continious 12 Volt (uninterupted) with currant about 8 Amp
2) accessopry or ignition 12 Volt (for on/off the radio (0,01 Amp).
Y look in the fuse panel (in the dash... low profile mini fuses)...
let you tell me choice of fuse where i can instal
a ADD A CIRCUIT (i can have i9t for low profile..).
for get this two voltages
Submitted: 1 year ago.
Category: Nissan
Expert:  Don 'Mo Lurch' replied 1 year ago.

.

Expert:  Don 'Mo Lurch' replied 1 year ago.

Connect at BCM
Constant 12 Volts + = WHITE (40A) wire located at BCM ...WHITE 15 PIN Connector, PIN 11
Accessory 12 Volts + = WHITE (+) wire located at BCM ...BLACK 40 PIN Connector, PIN 26
Body Control Module (BCM) is located behind the instrument cluster