Nissan Repair Questions? Ask a Mechanic for Answers ASAP
Hi, My name is ***** ***** for the delay.
I will do my best to assist you
sense the cooling system has been worked on,,you may now have air in the system
you need to bled the cooling system..
lets do it this way..
1-remove the radiator/reservoir cap when the engine is cold
2-start the engine and let idle
3-turn the heater on max
4-keep coolant on hand and add it as needed
5-spme coolant may gush out with the air
6-keep doing this until the engine is at operating tempeture and the heater is hot
7-after the coolant settles down and the engine is warm,,install the cap
This may take as long as 20-30 minutes
If you are satisfied with my answer, Please Rate my answer by clicking the rating button so I can get credit for my work. I’m not always going to be giving you good news, so please don't let this stand in the way of you accepting my answer. .it does not cost you more money and we will still be able to communicate, ,.please understand, i can not see, hear or touch the vehicle and only know what you tell me. Bonuses and positive feedback are appreciated.. if you are not satisfied with my answer, please do not leave bad feedback ,i will gladly opt out and let another expert handle the question. .if i have sent any diagrams, please print them. .sometimes you may need to right click the image [,then save picture as]to save it to your computer so you can open it with your picture program...Please ask if you need more help.