How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Clifton B. Your Own Question
Clifton B.
Clifton B., ASE Master Auto Tech
Category: Nissan
Satisfied Customers: 3848
Experience:  ASE Master Certified Tech, Nissan Master Certified Tech, 12 yrs. experience in auto repair.
6166830
Type Your Nissan Question Here...
Clifton B. is online now
A new question is answered every 9 seconds

Nissan Titan: My nissan Titan 2004 wont start, after research

Customer Question

My nissan Titan 2004 wont start, after research online I believe is the IPDM, Swap relays didnt work, I did the Nissan Auto Active Test and was goow.
I ordered New ECM Relays and a Used IPDM box. Beside this what else can be?
Submitted: 1 year ago.
Category: Nissan
Expert:  Clifton B. replied 1 year ago.
hi is the service engine soon light in when trying t start
Customer: replied 1 year ago.
No.,, It doesnt try to start is jost not power goint to the engine.
Expert:  Clifton B. replied 1 year ago.
so the engine do not turn over at the no starter engagement ??
Expert:  Clifton B. replied 1 year ago.
what happen when you try to start the engine ??
Customer: replied 1 year ago.
Nothing happen, is like if the battery is dead,
Expert:  Clifton B. replied 1 year ago.
do the horn or head light work
Customer: replied 1 year ago.
yes it works, everithing turn on like normal with the switch in ON position, just the engine does nothing.
Expert:  Clifton B. replied 1 year ago.
is there any clicking or flickering of the gauges at all
Customer: replied 1 year ago.
Yes, I can hear the clicks. Gauges also flick like when truck is going to start normally.I got a used IPDM and installed it today but not working either.
Expert:  Clifton B. replied 1 year ago.
do you get multiple clicks or just one
Customer: replied 1 year ago.
1 click in by the key switch in driver side, 1 click in the fuse box on driver side, and 1 click under hood. I belive in the IPDM.
Expert:  Clifton B. replied 1 year ago.
did you try to jump start the truck ??
Customer: replied 1 year ago.
I tried that at first, and I had someone to check my battery wich was good. I may should charge or jump again?
Customer: replied 1 year ago.
I did this test: with the headligths Turn on and attempt to start the vehicle. If the headlights do not dim, the ignition relay switch is defective. If the lights do dim, the relay switch is working correctly and the problem is elsewhere.
NO DIM
Customer: replied 1 year ago.
I just checked. No flickering in the gauges.
Expert:  Clifton B. replied 1 year ago.
you should try to jump start the truck but do not use cables use a jump box
Expert:  Clifton B. replied 1 year ago.
it really sound like the weak battery to weak to turn the starter
Customer: replied 1 year ago.
I dont have a Jump Box, Should I try using cables.?
Expert:  Clifton B. replied 1 year ago.
you can
Expert:  Clifton B. replied 1 year ago.
let me know what happen make sure the cables are good
Customer: replied 1 year ago.
If that doent work what should I do check next?
Expert:  Clifton B. replied 1 year ago.
the starter but it is located under the intake manifold
Customer: replied 1 year ago.
Ok. I jumped and no working. something else should I check before the starter?
Expert:  Clifton B. replied 1 year ago.
if the engine do not turn you need to check the power at the starter it could just be a bad starter