How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Knight Your Own Question
Donald Knight
Donald Knight, ASE Certified Technician
Category: Nissan
Satisfied Customers: 1736
Experience:  40+ years
Type Your Nissan Question Here...
Donald Knight is online now
A new question is answered every 9 seconds

Please how do I resolve this codes on my 2005 nissan xterra

This answer was rated:

Please how do I resolve this codes on my 2005 nissan xterra P1168 and P1051
good morning.The codes you have are for the engine not going into closed loop operation(P1168).This is probably caused by the second code you have(P1051)which is the heater circuit for the oxygen sensor on the left bank(drivers side).I would replace the oxygen sensor and that should correct your problem unless you have a wiring problem.Have a close look at the wiring going to the sensor and make sure that it is not broken or resting on the exhaust manifold.Please let me know if you need more assistance,Don
Donald Knight and other Nissan Specialists are ready to help you
Customer: replied 3 years ago.

Your answer was excellent. I found out that the sensor connector was having a partial contact and I have rectified it. Thanks a lot for your help

Related Nissan Questions