My pathfinder air condition and blower comes on in postion 1,2,& 3, but dosent not come on in postion 4. the blower work in postion 4 but dose not blow air in postion 1,2, & 3. I have replace blower motor relay and check all fuses. What do need to do to fix problem. Air conditon comes on but no force air when on?
Hello I will help you with your question,
On the lower three speeds the blower current passes through the blower resistor. It sounds like your resistor has failed.
The resistor is in the bottom of the blower case next to the blower resistor. It has an electrical connector (follow the wiring from the blower motor) and a couple of screws that you remove and the resistor slides out of the blower case.
Replace the resistor and you should have your lower speeds back
Please let me know how I can help you
If you would like any additional information or have more questions please don't hesitate to ask!Please remember to only rate my service not the content as you may not like the answer but it is the truth. Only rate when you are satisfied. IF you feel the need to click the lower two ratings they are negative feedback that sticks on my record so please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.Thank you
Did you change the question?
I see you posted that the air does not blow in the lower speeds yet you say it does work in the lower speeds?
Maybe you can clarify your questions
The aircondition comes on in lower speed but blower dose not blow air.
Are you saying the blower motor is running in all speeds but it seems the ducting is blocked?
George let me check the resistor, for thing this maybe problem. I would like to pay you the $18 for your advise. I hit the good service smiling face, gut nothing happens. What should I do?
Do not attempt to rate until I have provided some help for you. So far I am not sure what you have going on so the rating is disabled.
If the blower operates on all speeds then it is NOT the resistor.
If it seems that the ducting is clogged while the blower motor is running normally then lower the glove compartment by pressing the sides in and open the cabin filter compartment behind the filter. Pull the filter out and then try the blower motor on all speeds.
Let me know what you find so I can help
Hello and thank you for using JustAnswer.comDid I understand your question. You hear the blower motor work on speeds 1 2 3 but you don't feel the air until you put it on speed 4?Let me know, Thanks Jay!
George H. all ready help me, it was the resistor. I have replace it and problem is fix!
Glad to hear it!
Please let me know if you have further questions
Thanks for letting me know