Recent Feedback
I recently change the steering rack on my 2004 maxima se, however the vdc light came on after so how do I reset it.
Country: United StatesMake: Nissan/DatsunModel: Nissan maximaYear: 2004Engine: 3.5se Already Tried: Disconnecting the battery.
HI!
you have a steering angle sensor that need to be adjusted , there is a spiral cable behind wheel also if you turned wheel with rack unhooked it could damage sensor also and turn on vdc light ,
did you turn wheel with rack unhooked ?
that would be your ABS unit making noise
you could have a bad sensor like wheel sensor or steering angle out of adjustment , the only way to check this is with a scan tool like a consult you can adjust angle sensor and check for any other codes also .
the noise is you solenoids trying to adjust pressure
let me know if you have any more questions, Thank you ROY!
you will need the scan tool this is your only way to know for sure
let me know if you need any more help Thank again ROY!
Our chat has ended, but you can still continue to ask me questions here until you are satisfied with your answer. Come back to this page to view our conversation and any other new information. What happens now? If you haven’t already done so, please rate your answer above. Or, you can reply to me using the box below.
Let me know if you have any more questions, I will be glad to help you more Thank you ROY!