How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask marcpod Your Own Question
marcpod
marcpod, Own collision repair advice
Category: Nissan
Satisfied Customers: 2881
Experience:  i-car/Basf training, 300 repairs and 650,000 in Collision 18 yrs exp licensed adjuster
17579256
Type Your Nissan Question Here...
marcpod is online now
A new question is answered every 9 seconds

How to program a key for nissan murano

Customer Question

how to program a key for nissan murano
Submitted: 7 years ago.
Category: Nissan
Expert:  marcpod replied 7 years ago.
Welcome to just answer. What year is the murano?
Customer: replied 7 years ago.
a have 2 car key i lost a code
Expert:  marcpod replied 7 years ago.

ID Code Entry Procedure


KEY FOB ID SET UP WITHOUT CONSULT-II

NOTE:

  • If a key fob is lost, the ID code of the lost key fob must be erased to prevent unauthorized use. A specific ID code can be erased with CONSULT-II. However, when the ID code of a lost key fob is not known, all controller ID codes should be erased. After all ID codes are erased, the ID codes of all remaining and/or new key fobs must be re-registered. To erase all ID codes in memory, register one ID code (key fob) five times. After all ID codes are erased, the ID codes of all remaining and/or new key fobs must be re-registered.
  • When registering an additional key fob, the existing ID codes in memory may or may not be erased. If five ID codes are stored in memory, when an additional code is registered, only the oldest code is erased. If less than five ID codes are stored in memory, when an additional ID code is registered, the new ID code is added and no ID codes are erased.
  • If you need to activate more than two additional new key fobs, repeat the procedure "Additional ID code entry" for each new key fob.
  • Entry of maximum five ID codes is allowed. When more than five ID codes are entered, the oldest ID code will be erased.
  • Even if same ID code that is already in the memory is input, the same ID code can be entered. The code is counted as an additional code.