How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike V. Your Own Question
Mike V.
Mike V., Nissan Technician
Category: Nissan
Satisfied Customers: 23627
Experience:  Nissan factory trained and Certified Subaru Technician.
Type Your Nissan Question Here...
Mike V. is online now
A new question is answered every 9 seconds

Nissan frontier: disconnect..front o2 sensor..cyl..wheel drive

Resolved Question:

how to disconnect wire harness for front o2 sensor on nisssan frontier 2001 4 cyl XXXXX I know the grey plus disconnect but connect find a way to disconnect them. Not sure if I am not using enough force.
Submitted: 7 years ago.
Category: Nissan
Expert:  Mike V. replied 7 years ago.
HI there! HERE is a description of the connectors. This is the waterproof type connector. Very tight and do require a good bit of pulling to seperate. You have to make sure the tab is pushed in all the way. Sometimes needle nose pliers will help with these. Hope this helps!
Customer: replied 7 years ago.
your illustration shows tab locking connectors and refers to illustration e6 for a sliding connector. I think mine is a sliding connector. Do you have that illustration?
Expert:  Mike V. replied 7 years ago.
Sure do! I didn't think it was this type. HERE is the diagram
Mike V. and other Nissan Specialists are ready to help you

Related Nissan Questions