How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask karrs2fix Your Own Question
karrs2fix
karrs2fix, ASE Certified Technician
Category: Nissan
Satisfied Customers: 894
Experience:  Ase master technician,L1,tech net training,12 years experience
17741603
Type Your Nissan Question Here...
karrs2fix is online now
A new question is answered every 9 seconds

How to change ignition switch nissan altima 2005

This answer was rated:

how to change ignition switch nissan altima 2005
electrical switch or the key and tumbler unit?
Customer: replied 7 years ago.
the key and tumbler unit
remove steering wheel covers to access mounting screws for ignition lock cylinder. Most of them utilize "shear off screws" that hold the cylinder in place. You will need to use a drill or some other tool to remove the screws then disconnect the interlock cable. Reverse the procedure to install and break off the new shear off screws when installing the lock cylinder.
karrs2fix and 5 other Nissan Specialists are ready to help you
Customer: replied 7 years ago.
i have the new part but not come with mounting screws do i need to buy newones

Related Nissan Questions