How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, Mechanic
Category: Infiniti
Satisfied Customers: 15485
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Infiniti Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

How much would it cost for bcm maintenance on a 2010 qx56

Customer Question

How much would it cost for bcm maintenance on a 2010 qx56 infinity truck?
JA: I'm not sure of the exact price, but there's only a $5 deposit. The rest of the price information will be on the page I send you to.
Customer: How do I make the deposit
JA: When we are ready I'll take you to the appropriate web page.
Customer: Ok
JA: Are you fixing your QX56 yourself? What have you tried so far?
Customer: No I take it to the dealership on Monday morning...I have a great feeling it's a electrical problem
JA: Anything else you want the mechanic to know before I connect you?
Customer: Just the light keep flashing rapidly, and it's a struggle trying to start the truck sometimes
JA: Just to clarify, can you tell me which light it is? And does it blink first, then stay on steady?
Customer: Just my dashboard ..where all my car signals are like the oil light,engine light ,etc
Submitted: 1 month ago.
Category: Infiniti
Customer: replied 1 month ago.
If u can give me an estimate that would be great...I just want to get an idea before I get it checked out Monday
Expert:  Tim's Auto Repair replied 1 month ago.

Hi, My name is ***** ***** for the delay.
I will do my best to assist you.

Expert:  Tim's Auto Repair replied 1 month ago.

Parts InformationOEM Part #Price

Body Control Module

Body Control Module

284B19FD0A $354.10

Labor InformationSkill LevelMfg. WarrantyStandard

Replace IPDM/USM Module

B 0.0 - 0.5 labor

Replace Body/VMS Module

B 0.0 - 0.6 labor

Customer: replied 1 month ago.
Hello Tim...I believe I'm having a electrical problem with my Qx 56 truck
Expert:  Tim's Auto Repair replied 1 month ago.

please explain.

the price,part# ***** the labor is above

thanks

Customer: replied 1 month ago.
I took my truck 2 auto zone to get the battery looked at ...but the battery came back fine, then they told me it could be my starter,so I took it to a private auto mechanic shop,they told me nothing was wrong with the car...then the very next day I the car took a while to turnover... When it finally did every light in my car kept blinking rapidly for about 10 minutes...that's when I finally called the dealership and scheduled a appointment for Monday to get it worked on
Expert:  Tim's Auto Repair replied 1 month ago.

ok

the body control module could cause this,,

but,lets try something simple here first.

remove both battery cables from the battery,touch and hold the + and the - cables together for 5 seconds,then reinstall the cables back to the battery..this will reset the bcm and may fix your probem

thanks

Customer: replied 1 month ago.
Well I just did...same result ..SMh also did I mention my check engine light is on
Expert:  Tim's Auto Repair replied 1 month ago.

ok..sense the engine light is on,,there are codes stored in the computer,,can you scan it and give me the codes?

Customer: replied 1 month ago.
How do I do that?
Expert:  Tim's Auto Repair replied 1 month ago.

you must have an obd2 scanner..

auto zone and most parts stores will scan it and give you the codes for free.

these codes may give a clue to the problem

thanks

Customer: replied 1 month ago.
OK ...well I have 2 answer this issue tomorrow morning and get back with... Thanks a lot Tim ...u been a great help
Expert:  Tim's Auto Repair replied 1 month ago.

you are very welcome

Customer: replied 1 month ago.
Hey Tim I have the codes..it is (P0462) which says the fuel level sensor circuit Low input ...would this effect why my car had a hard time cranking up & why the lights kept blinking rapidly? Thanks
Expert:  Tim's Auto Repair replied 1 month ago.

no,it wont make it hard to start

Expert:  Tim's Auto Repair replied 1 month ago.

but

Expert:  Tim's Auto Repair replied 1 month ago.

it could make the light flash

Expert:  Tim's Auto Repair replied 1 month ago.

sense you do get that code,,

Expert:  Tim's Auto Repair replied 1 month ago.

the fuel pump itsef may be bad

Expert:  Tim's Auto Repair replied 1 month ago.

you may want to test the fuel pressure

Expert:  Tim's Auto Repair replied 1 month ago.

the pressure should be 51psi

Customer: replied 1 month ago.
OK cool...thanks Tim
Expert:  Tim's Auto Repair replied 1 month ago.

PLEASE COPY AND PASTE the link below to your browser, I have uploaded more info on this there.please copy and paste the link below to your main browser[INTERNET EXPLORER ,Chrome or Firefox.]

.

https://www.dropbox.com/s/ex7083w3ucarxtc/1030-infiniti-P0462.doc?dl=0

.

if the link doesn’t work that way, try it this way

thanks

.

www.dropbox.com/s/ex7083w3ucarxtc/1030-infiniti-P0462.doc?dl=0

.

If you are satisfied with my answer, Please Rate my answer by clicking the rating button so I can get credit for my work. I’m not always going to be giving you good news, so please don't let this stand in the way of you accepting my answer. .it does not cost you more money and we will still be able to communicate, ,.please understand, i can not see, hear or touch the vehicle and only know what you tell me. Bonuses and positive feedback are appreciated.. if you are not satisfied with my answer, please do not leave bad feed back ,i will gladly opt out and let another expert handle the question. .if i have sent any diagrams, please print them. .sometimes you may need to right click the image [,then save picture as]to save it to your computer so you can open it with your picture program...Please ask if you need more help