How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jay Your Own Question
Jay
Jay, Certified Infiniti Technician
Category: Infiniti
Satisfied Customers: 19057
Experience:  20+years, Nissan and Infiniti experience and currently now working for a Infiniti Dealer
10181755
Type Your Infiniti Question Here...
Jay is online now
A new question is answered every 9 seconds

I have service engine light on, on my 06 infinit m35. Car

Customer Question

I have service engine light on, on my 06 infinit m35. Car seems to be dragging at times and not driving a full potential of speed.
Submitted: 1 year ago.
Category: Infiniti
Expert:  Jay replied 1 year ago.

Hello my name is ***** ***** thank you for your question

Do you know what codes you have?

Customer: replied 1 year ago.
1757. 1754
Expert:  Jay replied 1 year ago.

Those are transmission codes i think... hang on let me check

Customer: replied 1 year ago.
I'm going back n fourth with diagnosis, few months back auto zones connected to a code reader devices codes read 1757, 1754, u1000. Now yesterday a repair shop read I needed a battery resistor and no other codes. Which the battery resistor job was done. Car driven like things were back to normal. Then hours latter things car started dragging again.
Expert:  Jay replied 1 year ago.

Yes this code is for front brake solenoid and input clutch solenoid in the transmission.

Most likely it is a valve body the car is going to need to resolve you issue since these solenoids do not come separately

Expert:  Jay replied 1 year ago.

Do you have any more questions on this?

Expert:  Jay replied 1 year ago.

If you have any more questions on this, please feel free to ask.

If not, and you are satisfied with my help please Rate me.

I hope that I have provided you with excellent service. Thanks Jay

Expert:  Jay replied 1 year ago.

The U1000 code you get when there is a communication problem with one of the control units. Since you have transmission codes, it could be the Transmission control module. But CAN diagnostics should be performed to verify.