How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris The Lawyer Your Own Question
Chris The Lawyer
Chris The Lawyer, Lawyer
Category: New Zealand Law
Satisfied Customers: 22400
Experience:  37 years qualified as a lawyer; LLB, MMgt and FAMINZ.
32702153
Type Your New Zealand Law Question Here...
Chris The Lawyer is online now
A new question is answered every 9 seconds

Bought A 140 transformer arc welder, In. I did buy a 140A

Customer Question

Hi there Bought A 140 transformer arc welder
JA: What state are you in? It matters because laws vary by location.
Customer: In nelson. Hi there
JA: Hi. How can we help?
Customer: I did buy a 140A arc welder and was advised that it was a good welder for a amateur.
JA: Has anything been filed or reported?
Customer: one i had to use it and it took me a full day to do 8 50 mm weldings because the machine shut downafter appr. 21.5-2 rods.
JA: Anything else you want the lawyer to know before I connect you?
Customer: Went back to repco and was advised that after 2 minutes you have to wait for 8 minutes to cool down, if you keep going it cuts out for 45 minutes.what sort of welder is that and nobody tolt me to stop after 2 min, but was told that it was a good amateur welder.
Submitted: 2 months ago.
Category: New Zealand Law
Customer: replied 2 months ago.
It supposed to say 1 day and also 8 50 mm and1.5-2 rods
Expert:  Chris The Lawyer replied 2 months ago.

Are you concerned about a refund, because this could be an issue where the Consumer Guarantees Act may apply. If you were sold something like this with a representation that it could do particular welding jobs, but it cannot do so, then you are entitled to return the item and have either your money back or a replacement. So if the machine is not fit for purpose, which is what you are saying, then they must do so

Related New Zealand Law Questions