How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
17258690
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

I dont have a harley but i have a motorized bicycle and its

Customer Question

good day i dont have a harley but i have a motorized bicycle and its a 2 stroke engine but the engine is not turning over o tried cutting off cdi plug tips and wiring with tape but engine still isnt turning over can you help me please
Submitted: 2 months ago.
Category: Motorcycle
Expert:  kwiggins29059 replied 2 months ago.

Hello, do you have the kill switch wired into the cdi unit?

Customer: replied 2 months ago.
no i disconnected it
Expert:  kwiggins29059 replied 2 months ago.

OK thanks, ***** ***** is going to be to see if the magneto is putting out voltage. with a voltmeter set on AC hook one lead to each wire coming from the magneto, make sure the wires aren't hooked up to the cdi, youll then need to peddle the bike while checking the AC voltage output. Let me know how it goes and we can work further.

Also here is the wiring info in case we need it later

Customer: replied 2 months ago.
i dont have a volt meter ti check