How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
17258690
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

I have a Lifan 3valve pit bike I'm assuming it's at 110 cc I

Customer Question

I have a Lifan 3valve pit bike I'm assuming it's at 110 cc I can't see no markings on the motor to confirm that. I can't seem to get compression I think I have the timing off but I messed with it and got it to top dead center on intake stroke coming down as well as exhaust top dead center just to rule out the possibility. Seems to be pushing the compression out the intake. this is also a project bike I had to figure out my wiring first and found spark. are my valves out of adjustment, or timing severely off ?
Submitted: 9 months ago.
Category: Motorcycle
Customer: replied 9 months ago.
I thought I'd get a response within ten minutes?
Expert:  cloe0626 replied 9 months ago.

sounds like the timing is off quite a bit

Customer: replied 9 months ago.
I was thinking I need a new rings but when I sprayed starting fluid in the carb a flame shot back out so i think it does have compression. could it be an intake valve not seating all the way b4 the exhaust valve opens? Btw there are 2 intake valve and one exhaust valve
Customer: replied 9 months ago.
I want my money back!

Related Motorcycle Questions