How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kenny O. Your Own Question
Kenny O.
Kenny O., Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
Category: Motorcycle
Satisfied Customers: 953
Experience:  Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years
30381042
Type Your Motorcycle Question Here...
Kenny O. is online now
A new question is answered every 9 seconds

Kenny, I have a 1995 klf300b with no spark. I have power at

Customer Question

Hello Kenny, I have a 1995 klf300b with no spark. I have power at the coil but it not pulsing. The pick up coil has 0.2vac and 543ohms resistance! Have checked rectifier and it seems to check out ok. any help greatly appreciated!
Submitted: 8 months ago.
Category: Motorcycle
Expert:  Kenny O. replied 8 months ago.

Hi Christopher, thanks for the request,

Can I get your VIN frame number (17 digits) so I can pull the correct diagram for this model ?

Thanks

Customer: replied 8 months ago.
LF300B-609338 is all that's on the frame Kenny! If there's another number somewhere on the frame let me know!!
Expert:  Kenny O. replied 8 months ago.

OK I see you are in Ireland, I wont be able to look it up anyway, is this a 2WD or 4WD unit ?

Customer: replied 8 months ago.
2wd!
Expert:  Kenny O. replied 8 months ago.

OK, thanks. do you have a manual on this unit ?

Customer: replied 8 months ago.
no not at the moment but have one ordered!
Expert:  Kenny O. replied 8 months ago.

OK, probably don't need on for this, I'm going to work up a sheet and post it up, I will give you a matrix chart on testing the igniter, I don't have much faith in those, when I was with Kawasaki we didn't use them much or recommend the dealers to use them because the reading varied so much between the different meters and temperatures. I was involved with the QA department and did a lot of research on this parts actually.

I will explain all that in my PDF file, give me a little bit

Thanks

Customer: replied 8 months ago.
That's great thanks
Expert:  Kenny O. replied 8 months ago.

OK Christopher here is the PDF file, make sure you save a copy,

Let me know if you have any questions

Thanks

Kenny

http://spaces.hightail.com/receive/HffYI

Customer: replied 8 months ago.
Hello Kenny, could you send me on that pdf file again thanks
Expert:  Kenny O. replied 8 months ago.

OK once you view this file you have to download it or it goes away,

Thanks

http://spaces.hightail.com/receive/PmjBi

Expert:  Kenny O. replied 8 months ago.

Hi Christopher this is just a follow up on your question, if more help is needed please reply back and we can continue and further diagnosing your problem, if satisfied with my help, please accept as I can get credited for helping you. Thanks again for using Just Answer, if help is need in the future, you can request my assistance and will be glad to help.

Thanks

Kenny