How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask kwiggins29059 Your Own Question
kwiggins29059, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2436
Experience:  Experience in Harley Davidson and Triumph
Type Your Motorcycle Question Here...
kwiggins29059 is online now
A new question is answered every 9 seconds

Trying to install a Backoff brake light signal module xp on

Customer Question

Trying to install a Backoff brake light signal module xp on a 2008 Victory Kingpin but doesn't flash. Should I be installing it after the existing module mounted in the rear fender or is there so other place to install it.
Submitted: 5 months ago.
Category: Motorcycle
Expert:  kwiggins29059 replied 5 months ago.
You need to install it after the existing module, right before the bulb. You will only use one set of the wires on the Backoff module depending on if you want mode 1 or mode 2 operation.

Related Motorcycle Questions