How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 11428
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

My Hyosung GT250R 2007 I have just bought doesn't turn on

Customer Question

Hi there, my Hyosung GT250R 2007 I have just bought doesn't turn on the head lights, but when I press the over take button the high beam comes on, what could the problem be?
Submitted: 9 months ago.
Category: Motorcycle
Customer: replied 9 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Louie replied 9 months ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, start with the basics; fuses, wiring, connectors....(even if just to eliminate them as suspects).

Still, proposed preliminary tries (if have not been done and dependent on the version) is to determine the presence of IGN+12V on the yellow/white wire of the right hand LIGHT switch when switched on:

  • • if present, then check the left hand DIMMER switch;
  • • if absent, check the right hand LIGHT switch itself.
Customer: replied 9 months ago.
This description you have just given me doesn't evan match my controls
Expert:  Louie replied 9 months ago.

Appreciate the post back.

Please provide clear closeup pictures of the right and left hand control harness connectors.

Thanks.