How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
17258690
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

1984 Honda magna 700 clutch issues: My clutch lever is as

Customer Question

1984 Honda magna 700 clutch issues:
My clutch lever is as hard as my brake lever.
My clutch was going soft after 10 or so minutes of riding, so I rebuilt the slave and master cylinders, and bled the system. Now, it seems the slave is not pushing the pushrod. With the slave off, I confirmed that the slave cylinder piston moves outward when the lever is pulled, but with the slave reinstalled, the lever stops halfway and is rock hard. Please help!
Submitted: 1 year ago.
Category: Motorcycle
Expert:  TIMOTO replied 1 year ago.

There is a plastic spacer that mounts between the slave cylinder and the cover. You did not loose it when you disassembled it did you?

Customer: replied 1 year ago.
No sir. Turns out, I installed the slave cylinder piston backwards in the cylinder. I got it fixed up and operating correctly. Thank you for your attention and print response sir.
Expert:  TIMOTO replied 1 year ago.

Glad to hear you fixed it.