How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 6830
Experience:  30+ yrs. experience, MMI, HD technician, HD early, engine rebuild/performance, bike builder, kit bike program manager, CCI 2001-2004
11090168
Type Your Motorcycle Question Here...
Steve is online now
A new question is answered every 9 seconds

Ed from fl. I pulled gear cover & 2 gears stayed with it how

Customer Question

ed from fl. I pulled gear cover & 2 gears stayed with it how to get them back in lifters in the way& how to time them
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Steve replied 1 year ago.

you cannot remove and replace the gearcase cover with push rods installed.

remove all 4 push rods, lifters and lifter blocks. (no way around it, don't even try)

install and time the cams (let me know if you need instructions)

install all 4 lifter blocks.

install the push rods, one cylinder at a time. (let me know if you need instructions)

- you will need new lifter block, push rod tube and rocker cover seals.

let me know if you need more help.

Steve

Expert:  Steve replied 11 months ago.

let me know if you need more help.

if not, please leave a POSITIVE RATING.

thank you,

Steve

Expert:  Steve replied 11 months ago.

let me know if you need more help.

if not, please leave a POSITIVE RATING.

thank you,

Steve

Expert:  Steve replied 11 months ago.

let me know if you need more help.

if not, please leave a POSITIVE RATING.

thank you,

Steve

Expert:  Steve replied 10 months ago.

let me know if you need more help.

if not, please leave a POSITIVE RATING.

thank you.

Steve