How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 11750
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

Just replaced on my grizzly 660 and now my temp light comes

Customer Question

Just replaced carburetor on my grizzly 660 and now my hi-temp light comes on
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Louie replied 1 year ago.

Hi and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially and based on the described symptom / work done, then the most likely possibility would be a pinched/grounded wire or more particularly, the white/blue wire from the cylinder head's thermo switch to the multi-function meter assembly.

Please post back results / observations of the above once tried.

Customer: replied 1 year ago.
Thanks found problem wire to sensor on intake was disconnected
Expert:  Louie replied 1 year ago.

Great! Good to hear that the issue has been resolved, congratulations.