How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Technician
Category: Motorcycle
Satisfied Customers: 24671
Experience:  17 years automotive training and experience.
14928985
Type Your Motorcycle Question Here...
Pete is online now
A new question is answered every 9 seconds

Need some help with a 2010 Kawasaki Mule transport 4010. DFI

Customer Question

need some help with a 2010 Kawasaki Mule transport 4010. DFI light has started to come on after i gave it a good washing. Could just be coincident, but it only have 210 hours of gentle use so really surprised in it is a fuel pump related. Also just changed oil and filter, so i keep thinking a sensor is loose. Check all connections with not positive result. Need help pulling error codes off unit.
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Pete replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
I apologize as my info is limited on this model here.
Since this occurred after a wash was done check and see if any wiring connections had got any water in them as this can cause this here.If any water is found in the connections this will need dried and cleaned out.If this is all checked and found o.k. let me know.
Thanks Pete
Customer: replied 1 year ago.
Pete - all connections checked prior to posting this question. Can you provide instructions on how to pull the error codes off the unit? Dfi light stays on now. - Jonathan
Expert:  Pete replied 1 year ago.
Unfortunately I don't have the info on how to pull the codes from this unit here myself.If you want I can open your question up for others here to see if anyone else can assist further on this just let me know if this is something you would like to do.
Thanks Pete
Customer: replied 1 year ago.
Pete - please do that, or simply refund my money. Thanks - Jonathan
Expert:  Pete replied 1 year ago.
No problem.I will open your question up for others here to see if anyone else can assist further on this.I hope you can get this resolved with ease.
Thanks Pete