How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne S. Your Own Question
Wayne S.
Wayne S., Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 1255
Experience:  Experienced and Licensed Motorcycle Mechanic - all sizes and brands welcome.
Type Your Motorcycle Question Here...
Wayne S. is online now
A new question is answered every 9 seconds

How to bleed air off clutch on GL 1500 Honda

Customer Question

How to bleed air off clutch on GL 1500 Honda
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Wayne S. replied 1 year ago.
Hi,Connect a small hose to the bleeder screw on the clutch slave cylinder. Immerse the end of the hose in some dot 4 brake fluid. Pull the clutch lever slowly a few times and then hold it in. Open the bleeder screw and allow the air out. Tighten the bleeder screw before you release the clutch lever. Repeat this process until the airstops coming out into the container with the brake fluid and bleeder hose. Pumping the lever gently and going slowly will allow the smaller bubbles to work their way out. Keep the clutch master cylinder reservoir full of fluid as you bleed and keep it covered so the brake fluid does not get on your paint. When the lever feels good and the air is out, fill the reservoir and you are done.----