How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 6880
Experience:  30+ yrs. experience, MMI, HD technician, HD early, engine rebuild/performance, bike builder, kit bike program manager, CCI 2001-2004
11090168
Type Your Motorcycle Question Here...
Steve is online now
A new question is answered every 9 seconds

I am changing the oil pan on a 1999 Ultra classic, all bolts

Customer Question

I am changing the oil pan on a 1999 Ultra classic, all bolts are loose, there are 2 large springs holding down a baffle, the new oil pan does not have these springs, is this an upgrade>? How do I get old oil pan out without trashing the springs?
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Steve replied 1 year ago.
the springs are part of the baffle.after removing the oil and trans lube and removing all oil pan bolts, remove the oil pan by sliding it to the rear.- the procedure requires the motorcycle be supported by a sling around the frame back bone, from above, with the rear wheel removed.during installation, it may be required to compress the baffle springs with a screwdriver while sliding the oil pan into place.let me know if you need more help.Steve
Expert:  Steve replied 1 year ago.
let me know if you need more help.
if not, please leave a POSITIVE RATING..
thank you,
Steve