How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
17258690
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

I am henry I have got a Suzuki burgman 400 with carb and

Customer Question

Hi I am henry I have got a Suzuki burgman 400 with carb and ecu this is no longer in the bike and i want to put it in a 3 wheeler so I need to know how to wire the ecu so ti will run
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Wayne S. replied 1 year ago.
What year is this bike?
Customer: replied 1 year ago.
Hi Wayne SI don't have a year for the bike as i only have the motor and the other bits we need
I think it is about year 2000 so K1 or K2 the ecu is a Denso NIG120 this is a UK bike
could you please reply to my Mail address ***@******.***
the hot mail address you used is my daughtersThanks henry
Expert:  Wayne S. replied 1 year ago.
I am sorry the site just responds to the email you were using when you signed up.
I have no way of changing the settings, you would have to go into your own profile
or contact the administration to have the email changed.
Have a look in your profile for email settings.
Can you list the number of wires and the colors on your ECU so I can look up the correct
wiring information for your bike?
Thank you.
----
Customer: replied 1 year ago.
Hi wayne
link to wiring diagram in colour
http://i1201.photobucket.com/albums/bb347/michaelphillips1959/Burgman%20400%20K2%20wiring%20diagram_zps8xcrtvv8.jpgI do have this as a bigger scan that I can send to you
ECU has 2 blocks 1 with 8 pins 1 with 4 pins so 12 in total
hope that helps
henry
Expert:  Wayne S. replied 1 year ago.
Give me some time and I will see if I can work out a simple
diagram for the ECU and upload it tonight.
Thanks
--(no reply necessary)--
Expert:  Wayne S. replied 1 year ago.
Henry, i have attached a basic wiring diagramfor most of the necessary connections for the ECU.I hope the colours in the diagram match your bikeor you may need to do some translation.I do not know if you plan to use all these wiresas some may not be needed such as the fuelpump. Originally the fuel pump was controlledby the ECU but you may be able to bypass that.It may take some trial and error but these are thebasic connections you need.I combined the orange/yellow with orange/whiteas they are both power wires.The safety systems on the original bike can bebypassed as you will not need side stand safety relays etc.Hope this helps to get some of it done anyway. WS
Customer: replied 1 year ago.
Hi WS Thanks a lot
I will have a look tomorrow
I think I understand it if i need to get hold of you to ask questions how do I do that
also can I ask a another question for another charge ?
the question will be how do I get the auto choke on the carb working
and the fan for the coolingThanks henry
Expert:  Wayne S. replied 1 year ago.
Auto choke just connects to the ECU black and the orange/yellow power wire.
Expert:  Wayne S. replied 1 year ago.
Cooling fan is on black/white ground wire and orange/yellow power wire.
Expert:  Wayne S. replied 1 year ago.
Just come back here and if you need to ask a new question later onjust request me by name "Wayne S"WS----