How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Emrys Your Own Question
Emrys
Emrys, ASE Certified
Category: Motorcycle
Satisfied Customers: 45
Experience:  11 years as lead tech, performance and race team exp.
68763268
Type Your Motorcycle Question Here...
Emrys is online now
A new question is answered every 9 seconds

When I took my evo moter apart I did not mark my push rods.

Customer Question

When I took my evo moter apart I did not mark my push rods. I need info on push rod length and proper location. I do not have a color code on rods anymore to go by. I am really stuck. I was told that longer push rod goes on front cyl. exhaust and that both intakes are the same. I need to make sure before tighting any thing.
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Emrys replied 1 year ago.
My name is ***** ***** I would be happy to help. First let me ask if these are stock or aftermarket?
Expert:  Emrys replied 1 year ago.
These are the stock lengths and positions:Stock EVO pushrods:Front Exhaust is Green 11.325"Front Intake is Yellow 11.090"Rear Intake is Blue 11.045"Rear Exhaust is Purple 11.210"
Expert:  Emrys replied 1 year ago.
If you have no further questions, please accept the answer so it can be closed out. Thanks, Emrys