How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 12055
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

Rubicon 500 atv does not show "N" on screen. 2012 model auto

Customer Question

Rubicon 500 atv does not show "N" on screen. 2012 model auto shift.
Submitted: 2 years ago.
Category: Motorcycle
Customer: replied 2 years ago.
The gear shift is in the handle bar and light N is not showing either the green light for Neutrual
Expert:  Louie replied 2 years ago.
Hi and welcome to JustAnswer,Thank you for the question and your patience. Should you still need assistance for information purposes only...Initially, based on the described symptom, foremost suspect would be the gear position sensor. Check the sensor itself, connectors and the wires leading from it to the instrument cluster.
Customer: replied 2 years ago.
what do I need to do to check the gear sensor?
Expert:  Louie replied 2 years ago.
The continuity function of a multimeter is needed. Locate the light green/red wire running from the gear position sensor to the ECM. Temporarily disconnect the connector that holds this wire. Check the continuity of this light green/red wire to engine ground.Normally, this wire would show a 0Ω reading to the engine ground when the gear is in neutral. If not:• connector/pin issue (least likely);• break in the wiring (likely);• faulty gear position switch/sensor (most likely).

Related Motorcycle Questions