I have a tomberlin crossfire 150 and the exhaust screw studs broke off in the cylinder, how can I get them out?It also won't turnover unless I short across the brake safety pressure switch?
Good day and welcome to Just Answer. My name is XXXXX XXX I'd be happy to help you with your problem today.
You would use an ez out to extract them, or drill them out, & use a time sert.
You should replace that bad switch
Thanks for the ez out info.
Just a little more on the brake switch. The switch was working and I noticed the brake fluid was very low so I filled it and bled the brakes, then the brake safety pressure switch on the part where the plunger pushes the brake fluid from pressing the brake pedal didn't work anymore and I had to short it to start the gocart. So you think the pressure switch just went bad?
the plunger part it sounds like from your description