I am wondering if a HD dealer can sell me a custom fatboy lo with a modified front end having a 14 degree rake? I spoke to the dealer and he told me he could only build a 2012 fatboy low with a mzximum of a 7 degree rake.
Good day and welcome to Just Answer. My name is XXXXX XXX I'd be happy to help you with your problem today.
Please see your other post.
You have an answer awaiting you at your other thread.
is that not available for you to see?
What Happens Now?Your chat has ended, but you can still work with your Expert to get an answer to your question if you have not yet received one.Come back to this page at any time to see additional information from your Expert. You will also receive an email when your question is updated. If you want to send a message to your Expert, use the box below.If you have already received a satisfactory answer to your question, click the Accept button above. Experts are credited for each accepted answer they provide.
please reply to either thread, thank you
What other post? I don't know how to access?
your original post here; http://www.justanswer.com/motorcycle/6mn6o-saw-fat-boy-chopper-online-when-googled-fat-boy-choppers.htmljust use the link in your inbox to get there.
did that help?..
No. It's not available to me. Please send the answer here. Thank you.
here is the link, you should also have one in your inbox. Please use that thread; http://www.justanswer.com/motorcycle/6mn6o-saw-fat-boy-chopper-online-when-googled-fat-boy-choppers.html
I opened the link, like before, but I can't find any answer there. I can't understand why you can't just send the answer back here where I am able to read it?
I'm not sure what you aren't seeing if tat opened. I prefer to keep all the info in one place. It is all there. here is the answer, which is posted there as well; Good day and welcome to Just Answer. My name is XXXXX XXXXX X'X be happy to help you with your problem today.You would not want more than 3 degrees added to a stock rake chassis. It will look horrible & handle even worse. In order to get 14 degrees of rake over stock you would need the frame itself cut & re-worked or just take everything off your stock frame & put it on a chassis that is made to order, & set up to handle with that much rake. Please let me know if you need more info or need to discuss this further.
Experience: ............
thank you, please let me know if you need more info, or want to discuss further