How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GIXXERJIM Your Own Question
GIXXERJIM
GIXXERJIM, Technician
Category: Motorcycle
Satisfied Customers: 113
Experience:  SPORTBIKES!HONDA,YAMAHA & SUZUKI CERTIFIED TECHNICIAN.DECADES EXPERIENCE WITH ALL METRIC CRUISERS,ATVS & SIDE BY SIDES
63691573
Type Your Motorcycle Question Here...
GIXXERJIM is online now
A new question is answered every 9 seconds

I have an 07 polaris sportsman 500 efi. Was riding about 5-10

Resolved Question:

I have an 07 polaris sportsman 500 efi. Was riding about 5-10 mph and check engine light came on, it cut off and has not started since. it is getting fire, and fuel to the top of the fuel injector but cannot get any fuel out of fuel injector. Does this mean it needs to be replaced or is there something else that may be causing it. it is not making any noises that I can hear.
Submitted: 4 years ago.
Category: Motorcycle
Expert:  GIXXERJIM replied 4 years ago.
seems there is an issue with the efi.turn the ignition from “OFF” to “ON”
3 times, leaving it 'on' the 3rd time, within 5 seconds.
Any “blink codes” stored in the ECU will display a numerical
“blink code”, one at a time, in numerical order, on the instrument
cluster LCD. The word ‘END’ will display after all codes have been transmitted.
please post all blink codes you find.
Expert:  GIXXERJIM replied 4 years ago.
oops.
any blink codes will display in numerical order.the word wait will appear on the lcd display & the mil or check engine light will begin to flash.record the number of flashes
12 indicates the beginning of the diagnostic sequence 61 indicates all the codes have been displayed.
Customer: replied 4 years ago.
I think I got them all. See below


122245475161
Expert:  GIXXERJIM replied 4 years ago.
i think the best thing i could do for you is give you this link to the service manual.
in the fuel injection section you'll find the diagnostic section.also some very good wiring diagrams in section 10.
it seems like you have a connector that came loose or the wiring harness got pinched or cut somehow.
GIXXERJIM and other Motorcycle Specialists are ready to help you

Related Motorcycle Questions