How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ski Doctor Your Own Question
Ski Doctor
Ski Doctor, powersports repair specialist
Category: Motorcycle
Satisfied Customers: 818
Experience:  over a decade of double time experience, excellent electrical and mechanical diagnosis capabilties
8702253
Type Your Motorcycle Question Here...
Ski Doctor is online now
A new question is answered every 9 seconds

i have a kawasaki bayou 300 and need to replace th starter

Resolved Question:

i have a kawasaki bayou 300 and need to replace th starter motor. I want to know if i can just pull the starter motor out and replace it or do i have to pull the side cover off it as well
Submitted: 7 years ago.
Category: Motorcycle
Expert:  Ski Doctor replied 7 years ago.

to remove and repalce the starter, you need to unbolt the starter asembley, and then the cables as well.

after the starter is unhooked and loose, you can pull it right out. there is a big o-ring that will make the starter stay inside the case, so it may need to be pulled out hard to remove it properley. when you reinstall the new starter, make sure you lube the o-ring to aide in installation.

Ski Doctor and 2 other Motorcycle Specialists are ready to help you
Customer: replied 7 years ago.
Do i need to pull the side cover off on the other side to aline the cog up properly
Expert:  Ski Doctor replied 7 years ago.
what year is your klf? depending on your year, you should just be able to push teh starter right into the case hole.

Related Motorcycle Questions