Recent Feedback
How do I adjust the rear disc brake on my honda goldwing GL1200A? it seems to be dragging causing a sqeak.
Optional Information: 1984 Goldwing GL1200A 1200ccAlready Tried: WD-40
Good day, the calipers are self-adjusting, the caliper may be sticking on the guide pin or the pistons may be sticky. The guide pin is what helps the pads center themselves on the disc. I suggest getting some new pads and if that doesn't help you will need to clean the caliper out and replace the piston seals. The whole brake system may need flushing as moisture gets in after a few years. The master cylinder relief holes could be clogged as well. Master cylinder is the part holding the brake fluid.