How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6935
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

I have a 4g64 motor in my eclipse and I have done a rebuild

Customer Question

I have a 4g64 motor in my eclipse and I have done a rebuild to it and I can't get it to start! I have replaced the crank sensor, pistons and all but can't get it to run even the computer has been replaced! I need help just about to give up on it I need help!
Submitted: 5 months ago.
Category: Mitsubishi
Expert:  HDGENE replied 5 months ago.

Hello, and thank you for using Just Answer! My name is***** me a few moments to review your question and Ill do my best to assist you.

Expert:  HDGENE replied 5 months ago.

Hello, couple of questions to start. This is the original motor that was in the vehicle? Why did you have to rebuild it, was it running before the rebuild? It cranks and wont start or it wont even crank over?

Related Mitsubishi Questions