How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john aka eauto Your Own Question
john aka eauto
john aka eauto, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 15062
Experience:  16 years ase certified
6149662
Type Your Mitsubishi Question Here...
john aka eauto is online now
A new question is answered every 9 seconds

MY 2007 MITSUBISHI ENDEAVER HAS OIL ON SPARK PLUG #2

Customer Question

MY 2007 MITSUBISHI ENDEAVER HAS OIL ON SPARK PLUG #2 CYLINDER CAN YOU TELL ME WHY
Submitted: 2 months ago.
Category: Mitsubishi
Expert:  john aka eauto replied 2 months ago.

have you done a compression check?

Customer: replied 2 months ago.
MY NEPHEW SAID THE COMPRESSION WAS GOOD
Expert:  john aka eauto replied 2 months ago.

the oil was it on the electrode ? does it smoke on start up? or when driving?

Customer: replied 2 months ago.
RUNS ROUGH AND HAS CODE OF MISSFIRE
Expert:  john aka eauto replied 2 months ago.

a leak down test is the next step to determine where the oil is coming from...likley cause is a valve guide or valve seal failure

Customer: replied 2 months ago.
OKTHANK YOU
Expert:  john aka eauto replied 2 months ago.

hope you can rate my service 5 star best of luck

Related Mitsubishi Questions