How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 21570
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Mitsubishi Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2.4 4b12 and was work on and the piston and rod may 2 holes

Customer Question

2.4 4b12 and was work on and the piston and rod may 2 holes on the block.
JA: What is the model/year of your Mitsubishi?
Customer: 2014 lancer gts 2.4l or 4b12
JA: Are you fixing your Lancer yourself? What have you tried so far?
Customer: change the engine because was droping the oil pressure, its got fix and only last for a month and start doing it again.
JA: How old is your oil pump? Has the check engine light come on?
Customer: yes, its a new one
JA: Anything else you want the mechanic to know before I connect you?
Customer: where is the block number on the 2014 lancer gts locate and how does it reads.
Submitted: 2 months ago.
Category: Mitsubishi
Expert:  sprinkles08 replied 2 months ago.

Hello and welcome to JustAnswer!

Having repeat internal engine failures would be rare and not likely to be related. Unless there is an outside factor such as going through water or abuse, if the engine was replaced as an assembly then I wouldn't expect the failure of the second one to be related to the failure of the first.

Was the replacement a used engine?

Related Mitsubishi Questions