How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Mitsubishi
Satisfied Customers: 24203
Experience:  Auto repair Technician with 17 years experience.Past ASE and other certifications.
Type Your Mitsubishi Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

No signal or hazards on 2002 Galan Es 2.4 liter fuse bulbs

Customer Question

no signal or hazards on 2002 Galan Es 2.4 liter fuse bulbs ok how to test out ETACS OR ECU spent hour not getting any were
Submitted: 1 month ago.
Category: Mitsubishi
Expert:  peterpete190 replied 1 month ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

In some cases this can be a fault internally with the ETACS itself or the turn signal switch.Usually this requires a multi meter to test signals and on some models a scan tool with data display.If you have any of these tools to test with let me know and I can try and walk you through the testing for this here.

Thanks Pete

Customer: replied 1 month ago.
not good enough answer what do I do. I know this already need to walk me through it point by point
Expert:  peterpete190 replied 1 month ago.

Have you had the fault codes checked/read out at all using a fully compatible scan tool that can read all computers?

Related Mitsubishi Questions