How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6899
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Need help on my mitsubishi galat

Customer Question

need help on my mitsubishi galat
Submitted: 3 months ago.
Category: Mitsubishi
Customer: replied 3 months ago.
I did everything on the car.Change the wire cable on the blower motor. Because it burnedTry to change temperature controlChange blower motor resistorBlower motor resistor
Customer: replied 3 months ago.
I recently change my ac compressor.The ac light is not on and the ac not working at all. When i put on 1 2 3 4 nothing happened
Expert:  david craig replied 3 months ago.

Hi Im David, thanks for visiting the site. i take it the blower motor isnt working?

Expert:  david craig replied 3 months ago.

4 or 6 cyl?

Customer: replied 3 months ago.
no i do not have money for it
Customer: replied 3 months ago.
4
Customer: replied 3 months ago.
i even change the relay on the blower mother. And all my fuse are good
Expert:  david craig replied 3 months ago.

dont have money for what?

Customer: replied 3 months ago.
to call. I just want to talk here if possible
Customer: replied 3 months ago.
can you help me
Expert:  david craig replied 3 months ago.

yes, but i didnt ask you to call

Customer: replied 3 months ago.
oh k
Expert:  david craig replied 3 months ago.

you are going to need to do a continuity test of the wiring for the blower motor circuit

Customer: replied 3 months ago.
thats all
Customer: replied 3 months ago.
you think it is a wire issue
Expert:  david craig replied 3 months ago.

yes i do. look at all you replaced. and its not fixed.

Expert:  david craig replied 3 months ago.

when you said you tried to change the temp control waht were you talking about? the control panel?

Expert:  david craig replied 3 months ago.

whenever i start troubleshooting an issue, I never start replacing parts just to replace them and hope it works. you spend time and money on this issue that didnt need to be spent. i only am trying to save my customers money by finding the problems root cause.

Customer: replied 3 months ago.
the one we using to switch ac controlthose 1234 panel. to make the ac work
Expert:  david craig replied 3 months ago.

oh ok...

Expert:  david craig replied 3 months ago.

have you checked the fusible links?

Expert:  david craig replied 3 months ago.

have you checked for 12vdc at the blower motor relay?

Customer: replied 3 months ago.
that is not the issue. But thank you
Expert:  david craig replied 3 months ago.

what do you mean its not the issue??

Expert:  david craig replied 3 months ago.

your ac light doesnt come on. your blower motor doesnt work. what are you talking about. there is apparently a wiring issue here.

Expert:  david craig replied 3 months ago.

you have replace just about everything there is to replace, apparently your way of troubleshooting isnt going to work with mine. good day. i hope you figure it out.

Customer: replied 3 months ago.
I have tried all cable .everything is working. I eveb went to a mechanic. Same thing