How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6901
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

I have a 1992 mitsubishi galant v6 i had no spark on 4 and 1

Customer Question

hi i have a 1992 mitsubishi galant v6 i had no spark on 4 and 1 so i put in another coil but still no spark
JA: What is the model of your '92 Mitsubishi?
Customer: mx
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes just the coil
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mitsubishi Mechanic about your situation and then connect you two.
Submitted: 6 months ago.
Category: Mitsubishi
Expert:  Chad Farhat replied 6 months ago.

Hi, I' m Chad. Welcome to JustAnswer. I' m reviewing your question now, and I will be post back with your reply ASAP

Expert:  Chad Farhat replied 6 months ago.

can you check with test light, are you getting power on ign coil connector and also check the ground coming to coil at connector are you getting ground from pcm to fire the coil

have all fuse been checked

are the other coils firing ?

please let me know

Thank You ***** ( aka -Customer)

ASE Certified Tech

Customer: replied 6 months ago.
the other coil are working
Customer: replied 6 months ago.
no
Expert:  Chad Farhat replied 6 months ago.

so are we getting power to the one not working on connector ?

Expert:  Chad Farhat replied 6 months ago.

what are you missing on that igntion coil, voltage or ground or both ?

can you check with test light please

Thank you

Customer: replied 6 months ago.
i am getting voltage at the main but not at the sceneder
Expert:  Chad Farhat replied 6 months ago.

hey how are you

do you mean the other pin of the connector when you say ( sceneder )

i m sorry i just want to be sure , i dont know what that means,

If you meant no ground on the other side of the coil only voltage , then we have a pcm problem or the wiring in between them, the igntion coil not going to fire without ground from pcm

Please let me know

Thank You

Chad (akaCustomer

Customer: replied 6 months ago.
i am getting power to the coil but not to the coil end where the spark pug leads go no to if that helps
Expert:  Chad Farhat replied 6 months ago.

is it possible to get a picture of what you testing

Expert:  Chad Farhat replied 6 months ago.

like can i see the coil connector where you tested ?

Related Mitsubishi Questions