How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8536
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

I have an 05 Galant and antilock and traction control lights

Customer Question

I have an 05 Galant and antilock and traction control lights are on
JA: How old is your battery? When was the last tune up?
Customer: Battery is three years old tuneup is year go
JA: Tell me a bit more about what's going on so he can help you best.
Customer: Light on the dash says TLC off the other light is antilock
JA: Are you hoping to fix this yourself?
Customer: Yes
JA: Great! What have you tried so far?
Customer: I put a new set of front brakes on it
JA: Is there anything else important you think the Mitsubishi Mechanic should know about your Mitsubishi?
Customer: The car don't get driven much it's only got 81,000 miles on it and the brake pad was still good but I can use them anyway that's all that ever been done to the car
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mitsubishi Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Mitsubishi
Expert:  john aka eauto replied 4 months ago.

do you have a scan tool?

Customer: replied 4 months ago.
I do have a scan tool and nothing comes up at all
Expert:  john aka eauto replied 4 months ago.

any codes?

Expert:  john aka eauto replied 4 months ago.

does your scan tool have abs capabilitys?

Customer: replied 4 months ago.
we use three different scanners and nothing come up
Expert:  Doug replied 4 months ago.


If you are not getting any faults but you are getting communication with the ABS module, I would want to get this on a factory scan tool for code reading. These vehicles are extremely particular about cooperating with third party scanners in several circumstances, ABS being one of them. In addition I would want to scan the ELCAT module as well as it has a few faults that can occur and trip the ABS/TCL lights too.

If the scan tools are not communicating with the ABS module, then you would want to double check all of your fuses are intact and connections on the pump are tight, else the ABS pump/module assembly would be suspect.

For what it is worth... these pumps/modules rarely fail. The majority of the time when I get these cars in from other shops after they have given up it is just a matter of using the factory scan tool to be able to read it properly.

Related Mitsubishi Questions