How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6896
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Mitsubishi lancer ralieart: 2004 mits lanser replaced timing

Customer Question

2004 mits lanser replaced timing belt started but runs rough checked found one tooth off 175 lbs of comp still did not bend any valves reset the timing now it wont start no injector pule or spark I have good ground every where the computer gives e a crank sensor failure code dam car just ran makes no since. replace crank sensor auto zone part. I get 5v reference volts every where but the crank sensor I get 8v there why?????
Submitted: 5 months ago.
Category: Mitsubishi
Customer: replied 5 months ago.
I also get battery volts on all third wires at conectors
Customer: replied 5 months ago.
also when connected to the $5000.00 snap on scanner I get 1350 cranking rpm;s this leads me to think the crank sensor is working but I did get a valve job done on this head at a machine shop is there nay way the cam sensor could cause this??
Customer: replied 5 months ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Wayne Crawford replied 5 months ago.
Hello. My name is ***** ***** I will be helping you today.What code is setting? And can you give me wire colors that you are checking voltages on?
Customer: replied 5 months ago.
Don't remember the color black is gd middle wire is signal and the other is battery voltage Coad is crank sensor.
Customer: replied 5 months ago.
what i just told you is at the injectors what time will you reply to this I would like to be available when you send the message or you can call me(###) ###-####
Customer: replied 5 months ago.
why does this take so long

Related Mitsubishi Questions