How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6899
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Mitsubishi Montero Sport LS: i have a 2003 montero sport 3.5

Customer Question

i have a 2003 montero sport 3.5 installed a timing belt bought new cam sensors and i lined up all arrows to top dead center and the truck stumbles and turn off
Submitted: 8 months ago.
Category: Mitsubishi
Expert:  Doug replied 8 months ago.
Hi,First off, did you use genuine Mitsubishi cam/crank sensors purchased from a dealership or aftermarket? This is important, as aftermarket sensors do not work properly on these trucks.Second... was the timing belt and sensors replaced as routine maintenance, or did something occur to necessitate replacement?
Customer: replied 8 months ago.

i bought them at auto zone the reason i bought them is because i thought this would fix my problem

Expert:  Doug replied 8 months ago.
Thanks.First thing we need to do is to get the original sensors back on there. As for your issue if it was stumbling/shutting off prior to the timing belt job... have you had any check engine lights set during this period or no?Does it always restart OK?When it is running/driving, does it seem like it is running normally during those times and only for example stumbling/stalling at stops?