How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, Tech Trainer
Category: Mitsubishi
Satisfied Customers: 1513
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Mitsubishi Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

2004 endeavor transmission problems after it was rebuilt by

Customer Question

2004 endeavor transmission problems after it was rebuilt by Ammco 2 years ago.It goes into limp mode after 10 minutes of driving and codes are p0733 p0732 u1073. I am a ase certified mechanic but don't work on tranny's.
Submitted: 9 months ago.
Category: Mitsubishi
Expert:  Juan Crespo replied 9 months ago.

If you don't work on trannies, then don't get yourself a headache and ship this one out - I mean, there is a NO BUS code you might want to tackle, but the other two codes mean second clutch set is toast.

Related Mitsubishi Questions