How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6899
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Not firing replaced crank shaft sensor and camshaft still

Customer Question

Not firing replaced crank shaft sensor and camshaft still not firing getting plenty of fuel.
Submitted: 9 months ago.
Category: Mitsubishi
Expert:  Doug replied 9 months ago.

Hi,

Do you have 12V and 5V at the crank position sensor connector while unplugged with the key on?

Are you using genuine Mitsubishi sensors or aftermarket (including ones from places like OReilly that claim they are genuine)? This is important as these vehicles do not get along with aftermarket hall sensors.

Related Mitsubishi Questions