How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8538
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Mi serial # 99d50467 can you send me the code please

Customer Question

Hi mi serial # ***** can you send me the code please
Submitted: 1 year ago.
Category: Mitsubishi
Expert:  Doug replied 1 year ago.

Hi,
I am checking your serial number out for you right now.

Expert:  Doug replied 1 year ago.

For serial number 99d50467 your unlock code will be

2800

To input the code your display must read "codE" when turned on. If it reads "oFF" from too many incorrect codes, you will need to leave the key on and radio "on" for one hour until the display goes blank. Once that happens you can turn the radio on again and "codE" will be displayed for three more entries.

With "codE" on the display, use preset buttons 1-4 to input the code. You will press:

Preset 1 three times
Preset 2 nine times

Preset 3 one time

Preset 4 one time
When finished you should have 2800 on the display and can then push the unlock button. This varies by radio but is always a program button... meaning either PROG, CD, AMFM or TAPE. There is no penalty for pushing the wrong one as long as your code is displayed correctly so you can just push each one once. The radio will beep and turn on when it is pressed.
If you have any questions or run into any problems, just reply back here and I can help you further.