How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8538
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

My serial number is 01 gallant I need the code

Customer Question

My serial number is ***** for a 01 gallant I need the code for the radio
Submitted: 1 year ago.
Category: Mitsubishi
Expert:  Doug replied 1 year ago.
Hi,
I am checking your serial number right now.
Expert:  Doug replied 1 year ago.
Thanks for waiting.
For serial number 99E14933 your unlock code will be
6384

To input the code your display must read "codE" when turned on. If it reads "oFF" from too many incorrect codes, you will need to leave the key on and radio on for one hour to clear this message. When the display goes blank you can turn is back on and "codE" will be displayed again.
If "codE" is on the display, use preset buttons 1-4 to input the code, with each press increasing the corresponding digit of the code. So for code 6384 you would press:
Preset 1 seven times (display increases 0-1-2-3-4-5-6)
Preset 2 four times
Preset 3 nine times
Preset 4 five times
When done you should see 6384 on the display and you can then push the unlock button. This varies by radio but is always either CD, AMFM or TAPE. There is no penalty for pushing the wrong one as long as your code is displayed correctly, so you can just push each one once. The radio will beep and turn on when it is pushed.
If you have any questions just let me know.