How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 18562
Experience:  ASE Master tech 15+ years
13574682
Type Your Mitsubishi Question Here...
George H. is online now
A new question is answered every 9 seconds

2004 mitsubishi diamante ls: procedure for headlamp R&R

Customer Question

Subject vehicle: 2004 mitsubishi diamante ls teardrop style headlights

Please provide procedure for headlamp R&R
Submitted: 5 years ago.
Category: Mitsubishi
Expert:  George H. replied 5 years ago.

Hello I will help you with your question,

 

The bumper cover and grille need to be removed to take out the headlamp

 

Click here for procedure

 

And here

 

And here

 

Look these over and let me know how I can help you

 

Thank you

 

 

George H. and other Mitsubishi Specialists are ready to help you
Customer: replied 5 years ago.
Really??? All that to change a bulb. Amazing. I assume you don't know of any workarounds or shortcuts.
Expert:  George H. replied 5 years ago.
You asked how to change the headlamp, the bulb is much less work.

Is it the left or right bulb you need to replace?
Customer: replied 5 years ago.
it is the left or driver side.
Expert:  George H. replied 5 years ago.
On the left side you raise the vehicle and remove the fender inner liner to get access to the back of the lamp, then remove the cap, the electrical connector and push in and down on the side of the wire retainer to disengage it. The retainer swings open like a door then you can remove the bulb. Note the tab on the top of the bulb base, it has to fit in the recess of the lamp housing and do not touch the bulb with you fingers so as not to get oils on the glass.

Let me know how I can help you with this

Thank you
Customer: replied 5 years ago.
OK. Much better. Thanks.
Expert:  George H. replied 5 years ago.
Glad to help and please let me know if you have further questions

Thanks