Recent Feedback
Hi GregMitsubishi Pajero GLS DID V78WLYXFORAbout 3 weeks ago I noticed a stiffness moving from N to D. Then after engaging D there is a lag of about 20 secs before the vehicle actually moves. The same problem from N to R. Otherwise the travelling is smooth. Took it to an authorised work shop. They opened the oil pan and reported that there were quite a lot of iron filings found in the pan. They then said the complete assembly has to be replaced! Is there a cheaper solution? Thanks Mike
Country: BruneiMake: Mitsubishi Pajero 3.2 DIDModel: V78WLYXFORYear: 2001Engine: 4M41 DX0089 Already Tried: Am looking to find a replacement transmission assembly if that this the only solution
Hi Mike .If you have a lot of iron filings then you will need a rebuild or replace the complete unit.Might be a lot cheaper finding a good used unit that has a warranty .But having a good rebuild comes with any where from 6 months to one year warrantyNeed further assistance Just ask.Regards Greg
Hi Greg,
Thanks for the response. Basically the workshop is correct going from your suggestion. Better to change out for a new and cheaper if a used unit is available. There are no facilities in Brunei yet where precision work like rebuilding can be attempted. Anyway tha
Hi .Then a replacement unit will be the best solution.Make sure you get the right one and the right year for the your engine check the 4wd sensors on top of the transmission these sensor are easily damaged when removed and stored ?check also the two input and output sensors on the left side also delicate Need further assistance please let me know.Kind regards Greg
Experience: 17 years shop owner, 27 year Import technician