How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8562
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

Mitsubishi Lancer Hi, I want know, how reset oil light on

Resolved Question:

Hi, I want know, how reset oil light on my Lancer 2.0L, 2011.

Thanks
Submitted: 5 years ago.
Category: Mitsubishi
Expert:  Doug replied 5 years ago.
Hi,

To reset the maintenance light, do the following:

Get in the vehicle but do NOT put the key in the ignition.
Press the INFO button on the side of the instrument panel until the maintenance screen is up (likely will say --- with a wrench if the light is currently on).
Press and hold the INFO button until the wrench starts flashing, the release the button and press it once.
The screen will read "CLEAR"

Note that when you do this, your mileage AND time value is updated.... if you do this twice, it will update again etc... so be sure to only do it once or it will say your next service is due in 20000km/18 months etc.
If your maintenance interval gets out of hand like that you will require a factory scan tool to reset it to normal values again
Doug and 2 other Mitsubishi Specialists are ready to help you