How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask K. Wiggins Your Own Question
K. Wiggins
K. Wiggins, ASE Certified Technician
Category: Mercury
Satisfied Customers: 2515
Experience:  AA in automotive Technology, 15+ years in the trade
68360881
Type Your Mercury Question Here...
K. Wiggins is online now
A new question is answered every 9 seconds

I need to hook up my MSD 8918 tac adapter, tac signal GMR,

Customer Question

I need to hook up my MSD 8918 tac adapter, tac signal GMR, magnetic Trigger style, each to get the tac to work. I have put the green wire on all the coil packs and it won't work.
The install instructions show grm pick up being connected to coil harness center wire marked coil [+]. There are a thousand wires of all colors coming off the powertrain control module. ??? which one?
Submitted: 4 months ago.
Category: Mercury
Expert:  K. Wiggins replied 4 months ago.

The + wire (red) on any of the coil packs should work according to msd. Are you putting the pickup on the wires properly as well as having switched power and ground as in figure 2 here as well as having it set for single cylinder operation

Customer: replied 3 months ago.

Thank you it"s done.

Expert:  K. Wiggins replied 3 months ago.

Glad to hear you got it going. Thanks for using Just Answer!